Blog

Wellhead flare system design guide for upstream wells — sizing for produced gas, flowback, and API 521 emergency contingencies, battery/solar spark ignition, OOOOb compliance, and[…]

Custom vs off-the-shelf flare systems guide — four levels of customization, lead time and CAPEX comparison, OOOOb certification documentation, hybrid sizing approach, and selection decision

Flare pilot monitoring guide — redundant sensor architectures, auto-relight logic, OOOOb continuous monitoring, redundant pilot configurations, and commissioning/annual verification for oil & gas.

Complete guide to EPA flare monitoring rules: 40 CFR 60.18, OOOO, OOOOa, OOOOb, OOOOc — 98% DRE, continuous parametric monitoring, EPA Methods 18/25A/25B, CEDRI reporting,[…]

Flare tip erosion guide — causes, detection through thermocouple trend data, inspection schedule, typical replacement intervals across flare types, and aftermarket service for OOOOb-affected facilities.

Sonic flare tip design guide — fixed exit slot vs variable exit area, turndown comparison, control mechanisms, OOOOb compliance, and selection criteria for oil &[…]

Enclosed vs open flares selection guide — vapor combustor vs air-assist/sonic/utility flare, neighbor visibility, OOOOb 98% DRE compliance, CAPEX comparison, and combined architecture for oil[…]

HP sonic flare guide — 50-150 psig inlet pressure operating envelope, higher capacity per tip, smokeless combustion on heavier hydrocarbons, relief header backpressure, OOOOb compliance.

Single-point vs multi-point staged sonic flare guide — turndown ratio, choked-flow logic, control sequencing, OOOOb 98% DRE compliance, CAPEX comparison for oil & gas service.

Complete guide to flare igniter selection: spark vs pilot ignition, OOOOb monitoring, redundant pilot design, auto-relight logic, and inspection schedule for oil & gas service.